Fabric Case

How to Assemble Your Organic Latex Mattress

Thank you for choosing inBed Organics.
To keep your mattress safe during shipping, it arrives in separate pieces:

  • The fabric case

  • The latex core(s)

Please handle the latex gently until it is fully enclosed. Each case includes a three-sided zipper, allowing for easy removal and cleaning.

Below are the step-by-step instructions for assembling your mattress.

Assembly Instructions: 6" Fabric Case (No Wool)

  1. Turn the fabric case inside out.

  2. Lay the inside-out case directly on top of the latex core.

  3. Reach inside the case and align the first 6" corner of the latex with the case.

  4. Move to the opposite side and align the other 6" corner.

  5. Align the two top seams across the width.

  6. Slowly begin to work the case down over the latex, following the seams along the length.

  7. Gently press the latex inward to help the case slide down.

  8. Carefully flip the latex core, turning the top to the bottom.

  9. Flipping will help the case move further into position—repeat as needed.

  10. Continue until the latex is nearly inside the case.

  11. Push the latex fully into the bottom of the case, even if the seams are not yet perfect.

  12. Flip the mattress back and forth until the latex naturally settles into place and the seams align.

Note: The case is intentionally made slightly larger to allow for shrinkage after washing.

Assembly Instructions: 8" Fabric Case (With Wool)

  1. Lay the fabric case unzipped on your bed frame, with the wool side facing down (we assemble it upside down and flip it later).

  2. Place the 2" latex topper inside the open case.

  3. Place the 6" latex core on top. If the core is wrapped in plastic, position it first and then carefully remove the plastic so it can unroll.

  4. Zip the case partially closed.

  5. Flip the mattress so the wool side is now facing up.

  6. Zip further if possible.

  7. If the zipper becomes difficult to close, flip the mattress upside down again to finish zipping.

  8. Once fully zipped, flip the mattress back to its correct orientation.

Handling Tips

Latex is strong but can tear if pulled incorrectly. To flip safely:

  • Do not pull on the fabric or stretch the latex.

  • Place one hand on the top surface and the other directly underneath.

  • Squeeze and flip in one smooth motion, without tugging.

If you need help at any point, we are here to support you.

📞 For assistance, please contact Jem at 778-892-4044.